Main equipment
1.Gluing part:
structure:
1.web roller gluing type
2.pressure roller adopts rubber roller, with fast self-change structure
3.the on-off of doctor blade adopts with pneumatic type, three-azimuth adjustment.and it also can make horizontal movement.
4.gluing roller is driven seperately, equipt with magent powder to control.
5.in-feed adjustment roller adopts double edges method.
6.even glue roller is driven by seperate motor, can rotate in both
 direction. it also adopts pneumatic unit
7.glue dish can be adjusted manually, along with air pump and glue 
 bucket, which is for glue cycle.
charater:
1.the three-azimuth adjustment of doctor blade can create the best
 scraping location.
2.magnet control which improve the tension precision.
3.in-feed double-edge trim adjustment, which makes the material flat to be glued.
4.the design of even glue roller improve the transparence.
5.the direct pressure type location set ensures the glue amount, which applies to different season’s operation.
2.Unwind part:
structure:
1.the first and second unwind adopts double-armed working mechanism.
2.the first and second unwind both adopt with EPC edge tracking.its
precision:土1mm.
3.auto tension control system, its checking precison 土0.5kg(MT－40), total two sets for uniwnd.
4.adopts with air expand shaft, the horizontal movement 土20mm.
5.the unwind rack rotated by seperate motor.
charater:
1.double working mechanism, convenient to change roll.
2.EPC tracking correct deviation ensure the trimness of the edge.
3.air expand shaft support rolling material, which is easy to change and support evenly.
3.Laminating part:
structure:
1.oscillating arm type double roller laminating method.
2.oil electric-heating laminating roller.
3.the pressure and on-off with pneumatic type
4.cooling roller keep steps with the main motor
5.cooling roller adopts water cooling type, full water cycle inside the roller.
charater:
1. oil electric-heating type with good performance of keeping tempearture, and ensure the even temperature on its surface.
2. cooling roller, cool the laminated material will improve the cohesion of glue layers and the peel off intension.makes the material no shift.
4.oven part:
structure:
1.the whole oven with channel steel connecting structure,full sealed six segments electric-heating system, control automatically, each segment with hot wind secondary collect structure, discharge the exhaust air centralize.
2.arc structure type inside oven, keep steps with the main motor.
3.the open/close of the top of the oven each segment is controlled by air cylinder.
4.the body of oven is made of two layers steel board, also together with heat preservation material.
5.install the working roof beside the oven.
6.the front side adopts with suction hood.
7.EPC tracking edge near the outside of oven.
8.adopts with wind supply cycle system.
5.rewind part:
structure:
1.double-armed turret type, driven by seperate motor.
2.rewind adopts with seperate torque motor.
3.air expand shaft support rolling material.
Function:Suitable for BOPP,CPP,PVC, paper and Aluminum foil. etc. two layers lamination.